Product categories

EPEVER TEP6425 MPPT Solar Regulator 60A, 12/24/48 V, Input 250V

5 215 CZK 4 310 CZK without VAT
Common price: 6 124 CZK

Unknown availability

Code: SOPEPE0020 PN: TEP6425 Warranty: 26 months
Výrobce: EPEVER
 (EPEVER Technologies Europe B.V.)
Poortweg 4A, 2612 PA Delft, Nizozemsko
info@epever.com
www.epever.eu
EPEVER TEP6425 High-performance MPPT solar charge controller with maximum tracking efficiency of 99.5% for professional photovoltaic systems. The EPEVER TEP6425... more

EPEVER TEP6425

High-performance MPPT solar charge controller with maximum tracking efficiency of 99.5% for professional photovoltaic systems.

The EPEVER TEP6425 controller from the TEP series represents an advanced solution for charging batteries from solar panels with a charging current of up to 60 A. It supports systems with voltages of 12/24/48 V with automatic detection and can handle a maximum input voltage from photovoltaic panels of up to 250 V at the lowest temperature (225 V at 25 °C). The MPPT range is from battery voltage plus 2 V (minimum 20 V) up to 180 V at 25 °C.

The controller achieves peak MPPT tracking efficiency of 99.5% and maximum conversion efficiency of 98.5%, ensuring optimal utilization of solar energy. It supports various battery types including AGM, gel, flooded, and lithium LiFePO4 and NCM with user-configurable settings. Maximum charging power reaches 780 W for 12 V, 1560 W for 24 V, and 3120 W for 48 V systems.

  • High MPPT tracking efficiency of 99.5% and conversion efficiency of 98.5% for maximum solar energy utilization
  • 60 A charging current with support for 12/24/48 V systems with automatic voltage detection
  • Maximum input voltage of 250 V at lowest temperature, MPPT range up to 180 V at 25 °C
  • Built-in CAN communication for parallel connection of up to 6 units with operation with/without battery
  • Independent BMS communication port for reliable charge and discharge control of lithium batteries
  • Isolated RS-485 interface with optional support for Bluetooth, Wi-Fi, TCP, or 4G modules
  • Battery-less mode enabling direct load power supply when sufficient photovoltaic power is available
  • Compartmentalized design for excellent dust resistance with IP20 protection rating
  • Low standby consumption of 98 mA at 12 V (with communication enabled), 48 mA when disabled
  • Charging temperature compensation of -3 mV/°C/2 V for optimal battery care

Advanced features and system flexibility
The controller offers three-stage charging control for optimal battery care and extended lifespan. The built-in BMS communication port enables direct communication with EPEVER batteries; for other brands, a BMS-LINK module is required. Real-time data logging, event logging, and performance statistics provide complete system operation overview.

Parallel operation and expandability
Thanks to built-in CAN communication, up to 6 controller units can be connected in parallel, enabling the creation of powerful systems with a total charging current of up to 360 A. Parallel operation is possible both with battery and without it in direct load power supply mode.

Extensive connectivity and monitoring
Isolated RS-485 interface with 5 V DC/200 mA power supply (RJ-45 connector) allows connection of optional communication modules for remote monitoring via Bluetooth, Wi-Fi, TCP, or 4G networks. The controller complies with EN/IEC61000-6-2, EN/IEC61000-6-4, EN/IEC62109-1, and IEC62321 standards.

BASIC SPECIFICATIONS

Electrical Parameters

Rated battery voltage: 12/24/48 V DC (automatic detection)
Operating voltage range: 8–62 V
Rated charging current: 60 A
Rated charging power: 780 W / 12 V; 1,560 W / 24 V; 3,120 W / 48 V
Maximum PV open circuit voltage: 250 V (at lowest temperature), 225 V (at 25 °C)
MPPT operating range: (battery voltage + 2 V, min. 20 V) up to 180 V at 25 °C
Maximum conversion efficiency: 98.5%
Tracking efficiency: ≥ 99.5%
Self-consumption (communication enabled): 98 mA / 12 V; 60 mA / 24 V; 46 mA / 48 V
Self-consumption (communication disabled): 48 mA / 12 V; 25 mA / 24 V; 14 mA / 48 V
Battery types: AGM, gel, flooded, LFP (LiFePO4), NCM (LiNiCoMn), user-defined
Temperature compensation: -3 mV / °C / 2 V (default)
Grounding: common negative
Communication: 5 V DC / 200 mA (RJ-45 interface)

Mechanical and Environmental Parameters

Dimensions: 357 × 200 × 90 mm
Mounting dimensions: ⌀8
Weight: 4.47 kg
Protection rating: IP20
Recommended cable / terminal: 2 AWG (35 mm²)
Operating temperature: -25 °C to +60 °C
Storage temperature: -30 °C to +70 °C
Relative humidity: 5% to 95% (non-condensing)
Altitude: < 5,000 m (power derating above 2,000 m)
Certification: EN/IEC61000-6-2; EN/IEC61000-6-4; EN/IEC62109-1; IEC62321

Brand
Type specification :  Regulator
Manufacturer :  EPEVER
Technical specification
Maximum Power (W) :  3120
Max. operating temperature (°C) :  60
Min. operating temperature (°C) :  -25
Technology :  MPPT
Inputs and outputs
Connector :  terminal
Power supply
Rated Voltage (V) :  12/24/48
Max. input voltage (V) :  250
Max. output current (A) :  60
Physical properties
Depth (mm) :  90
Weight (kg) :  4.47
Width (mm) :  200
Height (mm) :  357
Warranty
Warranty period EU (months) :  26
Warranty period CRN (months) :  26
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili
Scroll