Úvod   Regulátory   MPPT   EPEVER TEP10425

Kategorie produktů

EPEVER TEP10425 MPPT Solar Regulator 100A, 12/24/48 V, Input 250V

hodnotit
6 160 CZK 5 091 CZK bez DPH
Běžná cena: 7 234 CZK

Unknown availability

Kód: SOPEPE0022 PN: TEP10425 Záruka: 26 months
Výrobce: EPEVER
 (EPEVER Technologies Europe B.V.)
Poortweg 4A, 2612 PA Delft, Nizozemsko
info@epever.com
www.epever.eu
EPEVER TEP10425 High-performance MPPT solar charge controller with 100 A charging current for medium to large photovoltaic systems. The EPEVER TEP10425 controller... více
Počet:
Přidat do košíku

Oblíbené
Porovnat
Tisknout
Poslat známému

EPEVER TEP10425

High-performance MPPT solar charge controller with 100 A charging current for medium to large photovoltaic systems.

The EPEVER TEP10425 controller from the TEP series represents an advanced solution for charge management in solar systems with 12/24/48 V voltage. With a maximum charging current of 100 A and support for input voltage up to 225 V at 25 °C, it is ideal for caravans, boats, industrial monitoring, and small to medium photovoltaic installations. The controller achieves peak MPPT tracking efficiency of 99.5% and maximum conversion efficiency of 98.4%, ensuring optimal utilization of solar energy.

The device supports two independent PV inputs and offers flexible configuration including parallel connection of up to 6 units via the built-in CAN port. The unique battery-less mode allows direct load power supply with sufficient sunlight. The controller is compatible with various battery types including AGM, gel, flooded, and LiFePO4, while the built-in BMS communication port ensures reliable charge and discharge management of lithium batteries.

  • Maximum charging current 100 A for 12/24/48 V systems with automatic voltage detection
  • Peak MPPT tracking efficiency 99.5% and conversion efficiency 98.4% for maximum performance
  • Support for two independent PV inputs with maximum open circuit voltage 225 V at 25 °C
  • MPPT voltage range from battery voltage + 2 V (min. 20 V) up to 180 V at 25 °C
  • Parallel operation of up to 6 units with/without battery via built-in CAN port
  • Battery-less mode enables direct load power supply with sufficient power from PV panels
  • Compatibility with AGM, gel, flooded, LiFePO4, and NCM batteries with temperature compensation
  • Built-in BMS communication port for direct communication with EPEVER batteries
  • Isolated RS-485 interface with option to connect Bluetooth, Wi-Fi, TCP, or 4G modules
  • Compact dimensions 298 × 231 × 119 mm with weight 5.3 kg and IP20 rating

Advanced features and communication
The controller offers comprehensive real-time monitoring with data recording function, event logging, and energy production statistics. Communication is via isolated RS-485 interface with 5 V DC/200 mA power supply (RJ-45 connector). Optionally, modules for Bluetooth, WiFi, TCP, or 4G communication can be connected for remote monitoring and system management.

Protection and reliability
The device is equipped with comprehensive electronic protection and complies with international standards EN/IEC61000-6-2, EN/IEC61000-6-4, EN/IEC62109-1, and IEC62321. Operating temperature range from -25 °C to +60 °C and compartmentalized design ensure high dust resistance and reliable operation even in demanding conditions. The controller uses common negative grounding and offers low standby power consumption.

Flexible charging
Three-stage charge control with adjustable temperature compensation -3 mV/°C/2 V ensures optimal battery care. Output voltage range 8 V to 62 V covers a wide spectrum of applications. With communication disabled, consumption drops to only 48 mA/12 V, 25 mA/24 V, or 14 mA/48 V.

BASIC SPECIFICATIONS

Electrical parameters

Rated battery voltage: 12/24/48 V DC (automatic detection)
Operating voltage range: 8–62 V
Rated charging current: 100 A
Rated charging power: 1,300 W / 12 V; 2,600 W / 24 V; 5,200 W / 48 V
Maximum PV open circuit voltage: 250 V (at lowest temperature), 225 V (at 25 °C)
MPPT operating range: (battery voltage + 2 V, min. 20 V) up to 180 V at 25 °C
Maximum conversion efficiency: 98.4%
Tracking efficiency: ≥ 99.5%
Self-consumption (communication enabled): 98 mA / 12 V; 60 mA / 24 V; 46 mA / 48 V
Self-consumption (communication disabled): 48 mA / 12 V; 25 mA / 24 V; 14 mA / 48 V
Battery types: AGM, gel, flooded, LFP (LiFePO4), NCM (LiNiCoMn), user-defined
Temperature compensation: -3 mV / °C / 2 V (default)
Grounding: common negative
Communication: 5 V DC / 200 mA (RJ-45 interface)

Mechanical and environmental parameters

Dimensions: 298 × 231 × 119 mm
Mounting dimensions: ⌀8
Weight: 5.3 kg
Protection rating: IP20
Recommended cable / terminal: 2 AWG (35 mm²)
Operating temperature: -25 °C to +60 °C
Storage temperature: -30 °C to +70 °C
Relative humidity: 5% to 95% (non-condensing)
Altitude: < 5,000 m (above 2,000 m power derating occurs)
Certification: EN/IEC61000-6-2; EN/IEC61000-6-4; EN/IEC62109-1; IEC62321

Brand
Type specification :  Regulator
Manufacturer :  EPEVER
Technical specification
Maximum Power (W) :  5200
Max. operating temperature (°C) :  60
Min. operating temperature (°C) :  -25
Technology :  MPPT
Inputs and outputs
Connector :  terminal
Power supply
Rated Voltage (V) :  12/24/48
Max. input voltage (V) :  250
Max. output current (A) :  100
Physical properties
Depth (mm) :  119
Weight (kg) :  5.3
Width (mm) :  231
Height (mm) :  298
Warranty
Warranty period EU (months) :  26
Warranty period CRN (months) :  26
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili
Scroll